1997 Ordinances - Laserfiche WebLink

Home Browse Search

hundred feet to the inch (1" : 100'). For subdivisions within the city, the size of the sheet shall be no smaller than 8" x 13". If several sheets are necessary, they shall all be of the same size and match points shall be clearly indicated. After the final plat has been approved in accordance with the provisions of this chapter, and if such final plat exceeds a maximum size of 18" x 24", the subdivider shall, at his own expense, cause the final plat to be reduced to a size not to exceed 18" x 24". No final plat, nor a copy or reduced copy thereof, will be presented for recordation to the office of the clerk or the circuit court if the plat is larger than 18" x 24". Nothing in this section shall be construed to relieve the subdivider of the requirements in section 33-57 of this chapter. In addition to the above requirement, a digital copy of the subdivision plat in a format approved by the City Surveyor shall be submitted for any subdivision that creates ten or more lots. (b) The final plat shall contain the certificates and statements required by section 33-71(e) of this chapter. On the face of the plat a place shall be provided to receive the signatures, with dates of approval of: (1) The planning director or the principal planner. (2) The city engineer or the assistant city engineer. (3) The record owner of the property or the owner's agent and any trustees. (4) The subdivider or the subdivider's agent. (5) A notary public. (c) The final plat shall conform to the preliminary layout as approved and shall show the following: (16) Natural or noteworthy features to be preserved indicated either generally or specifically as required in section 33-t4 herein, tidal wetlands and the Chesapeake Bay Preservation Areas. (17) Total area, usable area and unusable area in acres of each parcel or lot created. 3. That this ordinance shall take effect on the date of its adoption.