1991 Ordinances - Laserfiche WebLink

Home Browse Search

(e) single-family dweP1ings other than townkouses may be waived provided that: (1) A subdivision plat approved pursuant to the subdivision chapter authorizes the placement of the dwelling on one side lot line; (2) The remaining side yard is not less in width than the sum of the two (2) minimum side yards formerly required; (3) Any wall facing on the zero side lot line is a structural wall capable of providing protection from fire, noise and visual encroachment; (4) At least ten (10) feet of the remaining side yard is open for access to the homeowner and city services; (5) At least a five-foot nonexclusive maintenance easement contiguous to the zero lot line wall on the adjoining property is reserved for the homeowner to repair and maintain said wall; (6) A one-foot eave encroachment is permitted across the line into the adjoining lot; (7) Such zero lot line placement is suitable u~iform and compatible with the surrounding neighborhood. FLAG LOTS requirements located. All yards of a flag lot must meet the minimum dimensional for a front yard in the zoning district in which the lot is Sec. 40-44.2. OrigiIml dimension:a! tables, One copy of each of the tables of Dimensional Requirements shall be kept on file without alteration in the office cf the Planning Department. These copies shall be called the Original Tables of Dimensional Requirements. Additional copies of said tables shall be filed in the office of the Planning Department and in the Department of Environmental Services. Such copies of the tables shall be altered from time to time so as to indicate amendments adopted by the city council. Each such alteration shall be identified by number to the ordinance authorizing the same. Additional copies of the tables may be made available along with copies of this Chapter. However, in case of any dispute as to the contents of the tables, the Original Tables of Dimensional Requirements shall control. Section 40-44.3. Effect of group housing review. Through the group housing review process, and subject to the applicable requirements and standards, the city council may allow deviations from the minimum lot size and dimensions and the minimum yard setbacks in any residential district but may not allow deviations along project boundaries or from the maximum density, minimum floor area or maximum site coverage requirements.